Rectangular Connnectors

Rectangular connectors.

 

 

 

 

 

 

 

Rectangular Rack

Multi contact connectors for removable racks.

Constructed from B-SMP modules. Stacked in a rigid and robust aluminium frame. Modules of 2, 3, 5 and 8 contacts.

According to the shape of the frame, the positioning guides and the fastening on the panel with or without float, gives rise to the three series of connectors for rack:

B-SML series frame: Positioning guides next to the fixing float:

marco para conector rack serie B-SML

 

B-SMR series frame: With float and positioning guides on ends (central or at one end).

marco para conector rack serie B-SMR

 

B-SMF Series: Without float. Four fixing points and positioning guides on each end. Also used in rectangular multipole connectors (B-SME series)

frame for B-SMF series rack connector

 

Modules are inserted into the corresponding frame. Stacked robustly and reliably. Configured according to your needs.  Connector length variable depending on the number of modules within:

multicontact modules in rack connector

 

The contacts can be of different types depending on the nature of the contacts they host:

      • Electrical: Male, female or mixed elements housed in the same monobloc. The contact section is defined by the number of elements in each monoblock. They can be 2, 3, 5, 8 with a nominal current per contact of 7.5 A up to 25 A. And with pins for soldering or crimping cable, or soldering on PCB.
      • Coaxial: Supplied in blocks of 2 connectors, which can be male or female and of 50 Ω or 75 Ω. The connectors can be assembled and disassembled inside the monobloc module, by means of an extraction tool. Compatible with D sub-coax connectors, DIN 41626 (1.0/2.3), etc.
      • Optical Fibre: Supplied in blocks of 2, 3 and 5 connectors.
      • Air compressed and vacuum: They are presented in blocks of two connectors, being able to be male, female or mixture of the two, for ∅4. tube.

 

Multi contact rack connectors

The multi contact connectors for rack are manufactured with thermostable material supporting temperatures from -40ºC to +120ºC, except the 8-contact module that is manufactured in thermoplastic supporting from -55ºC to +90ºC. Both with great resistance to impacts.

The central electrical contacts are gold-plated brass. Female contacts with contact safety springs, or with the new system TSS® with more than 500,000 guaranteed connection-disconnection cycles.

Rectangular

Series SME and SCT

Based on the same principle as the rack connectors series SMF, but are mounted in robust aluminium housings and clamped. Modules of 2, 3, 5 and 8 contacts can be stacked.

Rectangular Connectors

The modules are inserted into the robust frame and stacked. They are configured according to your needs.

Two connector sizes are available : 35.75 mm and 82.5 mm connection interface, corresponding to 13 umb and 30 umb respectively (MonoBlock Units, 1 umb=2.75 mm).

Contacts can be of different types depending on the nature of the contacts they host:

  • Electrical: They can be male, female or mixed elements in the same monobloc. The contact section is defined by the number of elements in each monoblock. They can be 2, 3, 5, 8 with a nominal current per contact of 7.5 A up to 25 A. And with pins to solder or crimp cable, or solder on PCB. Also with RJ-45 and USB connectors.
  • Coaxial: They are supplied in blocks of 2 connectors, which can be male or female and of 50 Ω or 75 Ω. The connectors can be assembled and disassembled inside the monobloc module, by means of an extraction tool. Compatible with D sub-coax connectors, DIN 41626 (1.0/2.3), etc.
  • Fibre Optical: They are supplied in blocks of 2, 3 and 5 connectors.
  • Air compressed and vacuum: They are presented in blocks of two connectors, being able to be male, female or mixture of the two, for ∅4.

The combination of some or all of these technologies in a single connector results in the COMBI-TECH connector series SCT.

Rectangular Multi Contact Connectors

The modules of the rectangular multi-contact connectors are manufactured with thermostable material supporting temperatures from -40ºC to +120ºC, except the 8-contact module which is manufactured in thermoplastic supporting from -55ºC to +90ºC. Both with great resistance to impacts. The central electrical contacts are made of gold plated brass. Female contacts with contact safety springs, or with the new TSS® system with more than 500,000 guaranteed connection-disconnection cycles.  The robust housing provides a very reliable connector in very harsh environments.

The manufacturing program is very broad, in addition to the two existing sizes, includes panel and aerial bases, straight and angled, which in turn can be short or long.

The cable exit is made by Press Estopa from 5 to 32 mm, multi-cable exit without hose or for corrugated tube from 10 to 48 mm.